A RAIN RFID Phased Array reader with 25 dual linear antennas and BLE gateway. Includes PoE, high gain antennas and BLE support. Including the main intelligent Smartspot services: item presence & proximity, sense & control engine for automated GPIO and item lists & set services for black-listing and white-listing.
- 1x Intellifi Smartspot Focus Ceiling Tile
- 1x 12V DC Power Supply with Euro/US/UK style plug
- 1x GPIO Pluggable terminal block
- Mounting point 100mm VESA ceiling mounting adapter
- 4 slot holes to mount the device on the wall
- Status LED
The status LED will blink when there are RFID tags present.
- Powering the device (12V DC/Ethernet)
There are 2 options to power the device: by using Power over Ethernet (IEEE 802.3af) or by using the DC port. The DC connector connects to the bundled 12V DC wall adapter, your own 12V power supply or a 12V battery for mobile operation. Power consumption is below 10W, typically around 8W.
- Ethernet port
IEEE 802.3af compliant Power over Ethernet port. Used for connecting the device to the internet and/or powering the device.
- Pinhole button
The pinhole button can be used in two ways:
- GPIO Ports
For applications that require inputs or outputs, there are two optocoupler inputs and two optocoupler outputs.
- Device serial number.
This product has the following orientation as shown in the figure below. All references to Smartspot Focus beam steering technology will be expressed in cardinal and intermediate directions: North (N), East (E), South (S), West (W), NE, SE, SW and NW.
To get started using the device read the "Smartspot Focus Ceiling Tile getting started" article.
Installation / mounting
Read the Smartspot Focus Ceiling Tile Installation / mounting article for details about the installation/mounting options of the Smartspot Focus Ceiling Tile.
- Declaration of Conformity: Click here to download the Declaration of Conformity Smartspot Focus Ceiling Tile