A RAIN RFID Phased Array reader with 25 dual linear antenna beams and BLE gateway. Includes PoE, high gain antennas and Bluetooth LE. Including the main intelligent Smartspot services: Item Presence & Proximity, Sense & Control engine for automated GPIO and Itemlists & Spotset services for black-listing and white-listing.
What's included
- 1x Intellifi Smartspot Focus
- 1x 12VDC Power Supply with Euro/US/UK style plug
- 1x GPIO Pluggable terminal block
Hardware overview
- Mounting point 100mm VESA ceiling mounting adapter.
- 4-Slot holes to mount the device on the wall or bracket.
- Status LED
The status LED will blink when there are RFID tags present. - 12 VDC Power supply
Using the12 VDC power adapter. Power consumption is below 12Watt, typically around 8Watt. - Ethernet port
IEEE 802.3af compliant PoE Ethernet port. Used for connecting the Smartspot to internet and as power supply. - Pinhole button
The pinhole button can be used in two ways:- Resetting the device to it's factory defaults, see: How to reset the Smartspot to factory defaults.
- Enabling the web-interface, see: How to enable and use the Smartspot web interface
- GPIO ports
For applications that require in- and outputs. In- and outputs are isolated using an optocoupler.
Device orientation
This product has the following orientation as shown in the figure below. All references to Smartspot Focus beam steering technology will be expressed in cardinal and intermediate directions: North (N), East (E), South (S), West (W), NE, SE, SW and NW.
Getting started
Read article Smartspot Initial Setup first and for detailed information regarding antenna beams refer to article Smartspot Focus - Detailed Setup.
Installation and mounting
Refer to article Smartspot Focus - Installation and mounting.
Documents
Comments
0 comments
Article is closed for comments.